Piston Calibrate Pressure Gauge Dead Weight Tester 0 ~ 60Mpa Accuracy 0.05
Description
Hydraulic pressure calibrator Dead weight tester is a Standard calibration. Dead weight testers are so called primary standards which means that the pressure measured by a dead weight tester is defined through other quantities; Length, mass and time. Typically dead weight testers are used in calibration laboratories to calibrate pressure transfer standards like electronic pressure measuring devices.
Detailed Images
Specification Piston Calibrate Pressure Gauge Dead Weight Tester 0 ~ 60Mpa Accuracy 0.05
| Parameter |
Unite |
Pressure Range |
| 0.6Mpa |
6Mpa |
25Mpa |
60Mpa |
| Upper limit |
Mpa |
0.6 |
6 |
25 |
60 |
| Lower limit |
Mpa |
0.04 |
0.1 |
0.5 |
1 |
| Nominal piston area |
cm2 |
1 |
0.5 |
0.2 |
0.1 |
| Base and Piston |
Nominal mass |
Kg |
0.4 |
0.5 |
1 |
1 |
| Generated pressure |
MPa |
0.04 |
0.1 |
0.5 |
1 |
| Special Weights |
Nominal mass |
Kg |
0.1;0.5 |
0.5;2.5 |
1;5 |
1;5 |
| Generated pressure |
MPa |
0.01;0.05 |
0.1;0.5 |
0.5;2.5 |
1;5 |
| Qty |
pcs |
6 ;10 |
4;11 |
4;9 |
4;11 |
| Thread Size |
|
M20×1.5 |
M20×1.5 |
M20×1.5 |
M20×1.5 |
| Weight |
Kg |
35 |
60 |
47 |
84 |
| Medium |
|
25# transformer oil or mixer of transformer oil and kerosene oil as 7:1, the kinematic viscosity is between 9 ~ 12 centistoke at 20℃,acid value is not more than 0.05mg KOH/g |
Sebacate (DIDG or diisooctyl sebacate) the kinematic viscosity is between 20 ~ 25 centistoke at 20℃,acid value is less than 0.05mg KOH/g |
Related products
FAQ
Q:How long will you reply me?
A:We will contact you as soon as possible but within 12 hours
Q: Can I get some samples?
A: Yes, Sample order is available for quality check and market test. But you have to pay the express cost.
Q: How soon can you arrange your production?
A: Once getting your product confirmation and receiving the prepayment, the production will be started immediately.
Q: What's delivery time?
A: It usually takes about 3-5 working days for small order and 10-15 days for big order.
Q:How do you control your quality ?
A: Three inspection steps(of original, production, and finished goods) + good warranty service(1 year free to change a new one without any human damage factors).
Q: What certificates do you have ?
A:ISO9000, CE, Explosion-proof certification, RoHs ready. And before the delievry of goods, quality and safety inspection certification issued by third parts also can be offered.
Q:Could I visit your factory?
A:Very welcome! Fly to Xian Yang air port. It was a big pleasure for us.
Q: What's your warranty terms?
A: We offer 12 months warranty time.
Q:can you provide OEM & Customized service?
A:Yes, OEM and ODM are both available, we have the professional R&D dept which can provide professional solutions for you.
Your message must be between 20-3,000 characters!
