Low cost dead weight tester pressure calibrator 0 ~ 60Mpa Accuracy 0.05
Description
Low cost dead weight tester pressure calibrator is a calibration standard which uses a piston cylinder on which
a load is placed to make an equilibrium with an applied pressure underneath the piston.Deadweight testers are
so called primary standards which means that the pressure measured by a deadweighttester is defined through other quantities; Length, mass and time.Typically deadweight testers are used in calibration laboratories to
calibrate pressure transfer standards like electronic pressure measuring devices.
Detailed Images
Specification
| Model |
YS-6 |
YS-60 |
YS-250 |
YS-600 |
| Measure Range |
bar |
0.04-0.6 |
0.1-6 |
0.5-25 |
1-60 |
| Accuracy |
% |
0.02 or 0.05 |
| Nominal Area of Piston |
cm2 |
1 |
0.5 |
0.2 |
0.1 |
| Carrier and Piston |
Nominal Mass |
kg |
0.4 |
0.5 |
1 |
1 |
| Produced Pressure |
bar |
0.4 |
1 |
5 |
10 |
| Supplied Weights |
Nominal Mass |
kg |
0.10.5 |
0.52.5 |
15 |
15 |
| Produced Pressure |
bar |
0.10.5 |
15 |
525 |
1050 |
| Quantity Block |
pcs |
610 |
411 |
49 |
411 |
| Pressure Connection |
M 20×1.5 |
| Working Medium |
Transformer Oil (viscosity 9~12 centistokes at 20i),
or Medical Castor Oil (aciditymg KOH/g) |
| Dimensions |
mm |
630×382×593 |
| Weight |
kg |
20+5.6 |
26+29.5 |
26+49 |
26+59 |
Features
YS-6 Deadweight Tester. Pressure Range 5.8 - 87psi. Accuracy: 0.015% or 0.020% of reading.
YS-60 Deadweight Tester. Pressure Range 14.5 - 870 psi. Accuracy: 0.015% or 0.020% of reading.
YS600 Deadweight Tester. Pressure Range 145 - 8700 psi. Accuracy: 0.015% or 0.020% of reading
Related products
FAQ
Q:How long will you reply me?
A:We will contact you as soon as possible but within 12 hours
Q: Can I get some samples?
A: Yes, Sample order is available for quality check and market test. But you have to pay the express cost.
Q: How soon can you arrange your production?
A: Once getting your product confirmation and receiving the prepayment, the production will be started immediately.
Q: What's delivery time?
A: It usually takes about 3-5 working days for small order and 10-15 days for big order.
Q:How do you control your quality ?
A: Three inspection steps(of original, production, and finished goods) + good warranty service(1 year free to change a new one without any human damage factors).
Q: What certificates do you have ?
A:ISO9000, CE, Explosion-proof certification, RoHs ready. And before the delievry of goods, quality and safety inspection certification issued by third parts also can be offered.
Q:Could I visit your factory?
A:Very welcome! Fly to Xian Yang air port. It was a big pleasure for us.
Q: What's your warranty terms?
A: We offer 12 months warranty time.
Q:can you provide OEM & Customized service?
A:Yes, OEM and ODM are both available, we have the professional R&D dept which can provide professional solutions for you.
Your message must be between 20-3,000 characters!
