water slurry sewage split/incorporate electromagnetic flow meter with IP68 water-proof flowmeter
Description Sewage pipeline cement slurry flowmeter electromagnetic flowmeter with sand
Intelligent electromagnetic flowmeter consists of two parts, the sensor and converter. It is based on the work of Faraday's law of electromagnetic induction, used to measure the conductivity is greater than 5μS / cm conductive liquid volumetric flow rate, is a measure of the volume flow of conductive medium for induction meter. In addition to measure the volume flow of conductive liquid, it can also be used to measure the volume of a homogeneous liquid-solid two-phase flow of a liquid suspension of acid and alkali and other strong corrosive liquids and slurries, pulp and paper pulp.Applications for beverages, chemicals, pharmaceuticals, petroleum,wastewater, water, mining, mineral processing, power, pulp and paper.and chemical industries. Magnetic flowmeters are used in water treatment plants to measure treated and untreated sewage, process water, water and chemicals. Miningand mineral process industry applications include process water and process slurry flows and heavy media flows.
Detailed Images Sewage pipeline cement slurry flowmeter electromagnetic flowmeter with sand
Specification Sewage pipeline cement slurry flowmeter electromagnetic flowmeter with sand
| Conductivity Range |
The measured fluid condutivity≥5μs/cm |
| Load Resistance |
0 ~ 10mA 0 ~ 1.5KΩ |
| Current Output |
4 ~ 20mA 0 ~ 750KΩ |
| Digital Frequency Output |
Transistor output frequency limit can be set with optical isolation within 1~5000Hz bidirectional open-collector output. External power supply is turned ≤35V maximum collector current of 250mA |
| Power Supply |
AC 220V Or DC 24V |
| Length Of Straight Pipe Requirements |
Up Stream≥5DN, Down Stream≥2DN |
| Connection |
are used between the meter and piping flange connection, flange dimensions shall comply with the provisions of GB11988 |
| Explosion Levels |
Exd II BT4 |
| Protection Class |
IP65, Special Order up to IP68 |
| Ambient Temperature |
-25℃ ~ +60℃ |
| Relative Humidity |
5% ~ 95% |
| Total Power Consumption |
Less Than 20W |
Dimension Sewage pipeline cement slurry flowmeter electromagnetic flowmeter with sand
Feature Sewage pipeline cement slurry flowmeter electromagnetic flowmeter with sand
1. The sensor adopts overall welding structure, good sealing
2. Record the measurement from the measured media pressure, temperature, density, viscosity and other physical parameters
3. With functions of conductivity measurement, can distinguish whether the sensor controller
4. Using 16-bit embedded microcontroller processor, a fast calculation speed, high precision
5. With two-way flow measurement function, can show positive and reverse flow, percentage, velocity of flow
6. With two-way flow measurement function, can show positive and reverse flow, percentage, velocity of flow
7. Digital content processing, strong anti-interference ability, reliable measurement, high precision
8. Low EMI switch power supply for power supply voltage change fan at large, the EMC performance is good
9. Since the diagnosis information and troubleshooting
10. Can provide explosion-proof type
Selection Sewage pipeline cement slurry flowmeter electromagnetic flowmeter with sand
Your message must be between 20-3,000 characters!
