Portable Analogous Air Magnehelic Differential Pressure Gauge -30-30 Pascal
Description Portable Analogous Air Magnehelic Differential Pressure Gauge -30-30 Pascal
2000 series differential pressure gauge minimum range 0-30Pa, maximum range 0-30KPa. There are as many as 88 kinds of range and metric / imperial units to choose from.
This differential pressure gauge using frictionless magnetic components, can rapidly measure the micro-pressure air or non-corrosive gases, including positive, negative (vacuum) or differential. No wear, hysteresis and clearance. Not filling, vaporization and freezing. This design has anti-vibration, anti-shake and high overpressure capability, you can guarantee access to high precision. The design impact, shock and overload protection.
Parameter Portable Analogous Air Magnehelic Differential Pressure Gauge -30-30 Pascal
| Medium: |
air and non-combustible, compatible gases (optional gas) |
| Housing: |
cast aluminum housing or ABS shell, glass beveled panels. Dark gray coating, can withstand 168 hours salt spray test |
| Accuracy: |
2% FS (mm units, and the range with the corresponding pa) |
| Pressure range:. |
-20Hg To 15 psig (-0.677 bar to 1.034 bar) |
| Temperature range: |
20 to 140 ° F (-6.67 to 60 ° C) |
| Hole size: |
114mm |
| Mounting Orientation: |
Diaphragm in vertical |
| Connections: |
same 1/8 "NPT high and low pressure fittings, one pair on the side, one pair in the back |
| Weight: |
500g / only |
| Standard accessories: |
two 1/8 "NPT threaded connectors for high and low pressure fittings can be connected with a rubber tube; two 1/8" NPT plug for blocking the remaining two high and low pressure ports; three a threaded countersunk mounting coupling (mounting ring, according to buckle holder for three interfaces to replace MP and count on attachments HP) |
Features Portable Analogous Air Magnehelic Differential Pressure Gauge -30-30 Pascal
It can measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care
equipment
Wide range choices available to suit your needs
Simple, frictionless movement, it quickly indicates low air or non-corrosive gas pressures-either positive, negative or differential
The design resists shock, vibration and over-pressures
No any fluid to evaporate, freeze or cause toxic and leveling problems
It's inexpensive and high accuracy-guaranteed within 2% of full scale
Optional mirrored scale overlay eliminates parallax reading error
Optional corrosion resistant brushed 304 stainless steel bezel
Your message must be between 20-3,000 characters!
